Cover Image

Solar active envelope module with an adjustable transmittance/absorptance

C. Villasante Villasante, I. del Hoyo, I. Pagola, M. Sanchez, E. Aranzabe

Abstract


A solar active envelope module with a high flexibility degree is proposed in this paper. The transparent module controls the day-lighting of the room, improving the indoor environment, while absorbing the superfluous solar energy inside. That energy is used to increase the efficiency of heating, ventilation, and the air-conditioning (HVAC) system of the building. This is carried out through a fine control of the absorptance of the envelope module. The active envelope module consists of three glazed chambers with advanced coatings and frames to assure a minimum thermal transmittance while allowing transparency. A fluid containing heat-absorbing nanoparticles flows inside the central chamber and is heated up due to the impinging solar energy. Unlike other systems proposed in the past, which included transparency control systems based on complex filters and chemical processes, the absorption of the module is controlled by the variation of the thickness of the central chamber with a mechanical device. That is, varying the thickness of the central chamber, it allows controlling the absorptance of the whole system and, as a result, indoor day-lighting and thermal loads. Therefore, a new system is proposed that enables to:

  

Keywords


Solar collector facade, architectural module, adaptive envelope, absorptance regulation, indoor comfort, dynamic control, thermal loads reduction

Full Text:

PDF


DOI: http://dx.doi.org/10.7480/jfde.2015.1.918

Copyright (c) 2015 Journal of Facade Design and Engineering

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

JFDE . ISSN 2213-3038